Detailed introduction of characteristics and advantages of widening carding machine in our factory

Widening carding machine is a kind of textile machinery, mainly used for processing cotton fibers and chemical fibers. The multifunctional carding machine can efficiently comb and remove impurities and improve yarn quality, so it is loved by the public. What are the characteristics and advantages of carding machine? Today, I will mainly explain the main contents of this part.

1. The main motor shaft of carding machine is equipped with an energy-saving clutch. Drive cylinder with v-belt. The cylinder drives the taker-in, which is simple and reliable in structure and stable in start-up. A taker-in speed sensor is provided to connect the taker-in speed with the switch car in parallel. Prevent traffic jams.
2, doffer motor AC frequency conversion stepless speed regulation, slow head, fast operation, convenient operation, sensitive and reliable control; Synchronous belt is adopted for transmission, which has stable operation and low noise.
3. The feeding roller of carding machine is driven by a separate motor. Ac frequency conversion stepless speed regulation and doffer linkage control.
4. A three-roller cotton stripping device is adopted, and a cleaning roller which is actively driven is arranged above the cotton stripping roller. In order to prevent doffer clothing from rolling. A movable trough-shaped solitary plate cotton collector is arranged between the roller and the large pressure roller. So as to improve the dynamic stability.

5. The left side of the machine is equipped with a fan and dust filter box. The waste flowers on the machine are continuously sucked and stored in a dust filter, and then are intermittently and sequentially sucked and utilized by the Dust collection system outside the machine. The waste flower and the tripe flower in the dust filter can be sucked separately, which can not only reduce the electricity consumption per typhoon. But also can improve the utilization rate of fibers.
6. Unique rack has high strength and easy adjustment. It is convenient to disassemble the large leakage bottom.
7, adapt to cotton rolls or cotton box feeding.
8. Set up front and rear fixed cover plates and licker-in carding plates.
9, cylinder doffer structure optimization design, strengthen rigidity, improve accuracy.
10. Convenient and safe fully enclosed enclosure.
11, stop around.
12. The cover plate adopts 0.56mm small heel toe. Improve carding efficiency.

Detailed Introduction of Characteristics and Advantages of Widening Carding Machine

6 major advantages of carding machine products:
The width of the product can reach 0-2.4 meters, which can be adjusted at will and the length is not limited.
2. All motors adopt frequency conversion control and can be equipped with automatic cutting equipment for molding.
3. Carding width and thickness can be adjusted. Each net curtain can be direct gear drive, which is convenient to adjust speed. Frequency conversion speed control is adopted for round trip. The operation is stable and the lifting and lowering of output curtain are convenient.
4. The mechanical products purchased in our company guarantee the quality, from installation to finished products, all of which are equipped with mechanical engineers for installation and debugging to ensure the smooth use of the machine.
5. Fold and lay the web carded by the carding machine evenly to the desired width and thickness.
6. It can be used by a single unit or connected by multiple units.