How to maintain and manage high speed nonwoven fabric production line in Belgium ?

The non-woven equipment produced by our company combines all the advantages of the old generation of products without the disadvantage that the old equipment can only process a single product, and the present non-woven equipment can be used to process various kinds of fabrics such as wool, cotton and chemical fiber cotton. Next, we mainly introduce you to the maintenance and management of non-woven equipment, as follows:

PET Nonwoven Production Line

1, raw materials must be neatly stacked in order;
2. All tools such as maintenance and scattered accessories should be included in the toolbox.
3, it is strictly prohibited to place inflammable and explosive dangerous goods on the equipment
4, the use of parts should be kept clean
5. All parts and components of the equipment shall be regularly oiled and rustproof.
6. Clean the product contact surface on the production line in time before opening the equipment to ensure that it is clean and free of sundries.
7, equipment work around the site should be kept clean without sundry;
8. The electronic control device of the equipment shall be kept clean and complete;
9, must regularly check the chain lubrication condition and add lubricating oil to the insufficient.
10. Carefully check whether the main bearings are kept in good lubrication.
11. If the equipment makes abnormal noise during the production line operation, it shall be stopped and adjusted in time.
12, often to do a good job of the important parts of the equipment, if there is an exception should immediately stop maintenance.

PLA Nonwoven Production Line