Planned maintenance of non-woven equipment.

Simply relying on the condition based maintenance of non-woven equipment is bound to affect the reliability of long-term stable operation of the equipment and increase the risk of equipment “crash”. Therefore, the maintenance of non-woven equipment also needs to be carried out according to the plan, which is sufficient for the planned periodic maintenance. Planned periodic maintenance refers to the time-based, preventive and timely repair methods, including equipment maintenance, minor repair and major repair. It does not need to deeply consider the status of non-woven equipment and whether it needs to be repaired.
In other words, in the process of equipment inspection, for the equipment found abnormal, according to the priority and abnormal degree of classification queue, timely and moderate repair, plan periodic maintenance, pay great attention to the detection in advance, collect information, timely maintenance two first system work out the total cycle schedule of annual maintenance, minor repair and major repair. And then arrange each work plan and acceptance method according to the annual master schedule, including the machine number, maintenance time, maintenance content and technical conditions for handover and acceptance.
On the one hand, it is necessary to make the best use of the idle time to arrange the plan for equipment maintenance; and it is necessary to consider the maintenance content as much as possible, and break through the limit of 8 hours a day to carry out continuous repair operations, so as to reduce the maintenance downtime time and times. In order to arrange the maintenance plan, it is necessary to do moderate maintenance, only dismantle and repair the fault parts, only repair and replace the damaged parts, further reduce the consumption of machine parts and downtime, and improve the economic benefits of the equipment and the operation rate of non-woven equipment.