What are the problems with good quality unwoven making machine and high speed unwoven making machine？
Non – woven fabric is a kind of fabric that will be used in many occasions at present, and the production and improvement of non-woven equipment is also of great significance to this industry, because as a new type of fabric, non-woven fabric still has a lot of room for development both in performance and in production methods.
In the manufacturing and development of production equipment, the most important thing we need to pay attention to must be efficiency. At present, the production efficiency of non-woven fabrics is still good, but still far from saturation value. There is still much to be done in terms of production speed and quality efficiency.
Let’s talk about an energy-consuming problem of the non-woven equipment itself. The production of non-woven fabrics now requires a lot of water, oil, coal, electricity and so on, which not only causes a large amount of material use, but also is a cost burden for non-woven fabrics production, which can greatly improve the application of non-woven fabrics.
Finally, there is the problem of non-woven fabric materials. The current equipment development route should pay attention to the use of some pollution-free safety materials. In any case, environmentally-friendly and healthy non-woven fabrics must be more popular than chemically synthesized non-woven fabrics, and this development direction will not change.
Only by inventing and improving better equipment can we produce better non-woven fabrics.
In non-woven equipment, not only the production capacity of the equipment needs to be adapted to each other, but also their external dimensions should be adapted to each other according to the overall arrangement. In order to save floor space, facilitate production and management, and make the workshop tidy and beautiful. Impurity removal is one of the important tasks of non-woven fabric machinery. When designing the structure of the machine, the discharged impurities should not be returned to the raw cotton, and the impurities and flying flowers should not be scattered into the workshop. As far as possible, a device for automatically eliminating impurities should be designed to improve the working conditions of workers.
The cotton box not only plays the role of mixing cotton, but also plays the role of ensuring even cotton feeding. The amount of cotton stored in the cotton box should be controlled at a certain level. In the enclosure, the output of the rear machine is slightly larger than that of the front machine. According to the amount of cotton stored in the cotton box, the starting and stopping of the feeding parts of the rear machine are controlled. But. For high speed and large inertia parts such as thugs and fans, it is not appropriate to start and stop frequently. This should be paid attention to when designing the transmission system. When designing the cotton opening and eliminating machine. Attention should also be paid to the generalization of machine parts and the convenience of adjustment of process parameters. The number of links that rely on manual intervention should be reduced as much as possible. Gradually realize the computer-centered mechatronics design and the automation direction of production process control.
